Syst. l espace infant c/mas ar

Product Description

SPACER CHAMBER FOR INHALER INHALER

Indications
Sealing chamber with valve that helps use metered dose inhalers (MDI). It improves the effectiveness of drug delivery to the lungs, reducing side effects.

Dosage and Directions for Use
1 - Before use, carefully examine the product to ensure it is assembled correctly and that there are no foreign objects or missing components. Remove any foreign objects before use.
2 - Before use, read the instructions provided with the MDI. Remove the cover from the MDI;
3 - Insert the MDI into the bottom;
4 - Apply the mask to the face and ensure there is a complete seal between the mask and face. To prevent the mask from being crushed, hold the device so that both the mask and the chamber are supported with your hand;
5- Press the MDI and inhale slowly through your mouth. Keep the mask firmly pressed against your face for at least 5 breaths after pressing the inhaler. During inhalation, air enters through the openings at the bottom, facilitating inhalation of the nebulized product. The exhaled air exits through the exhalation valve;
6- Wait 30 seconds before administering another dose of medication (repeat steps 4-5), or as directed by your doctor. Administer only one puff of medication at a time and follow your doctor's dosing instructions.

Features
The product does not contain latex.

Cleaning Instructions
If the device is always used by the same person, clean it as indicated. If the device is used by more than one person, it should be cleaned as directed. For people who use the mask, in addition to cleaning, it is necessary to sterilize it in an autoclave at 121°C for 15 minutes after each use. The device can be sterilized without compromising its functional characteristics up to 20 times, after which it must be replaced. If deemed appropriate, for a thorough cleaning, the device can be boiled or washed in the dishwasher.
A - The product should be cleaned following the instructions below before first use and then at least once a week: remove the bottom and mask;
B - Soak the parts for 15 minutes in warm water with a neutral disinfectant detergent. Shake gently;
C - Rinse in clean water;
D - Shake to remove excess water as shown. Do not use dry cloths to dry the device parts. Make sure the parts are dry before reassembling them;
E - Replace the bottom and mask when the parts are completely dry and ready for use. Center the alignment arrow on the rear component with the alignment notch on the body as shown.

Warnings
Replace the product if any component is damaged. Some components, due to their size, could be swallowed by children. Do not leave these components unattended. Adult supervision is always required. Do not disassemble the product beyond what is indicated in the cleaning instructions. If you have any doubts about the use of the product, consult your doctor or pharmacist. Clean the product only as directed in these instructions to ensure effective operation.

Storage
When not in use, store the product in a clean container.
Replace the product after 24 months of continuous use.

Formats
- Yellow background: mask for children 2-6 years;
- Orange background: mask for children 0-2 years;
- Magenta background: mask for adults.