Spare parts kit for rinowash nebulizer

Product Description

Spare parts kit for the Rinowash upper airway treatment device.

Kit contents

The package contains:

• 1 atomizer
• 1 external bell
• 1 sealing gasket.

How to use

• Cleaning: Rinowash, once dismantled into its components, can be washed with hot water (about 40°C) using detergent (dosed according to the detergent manufacturer's instructions) and rinsed under running water. Once all the parts have been cleaned, they can be dried with a soft cloth and stored.
• Disinfection: After cleaning, all the components of the Rinowash nasal douche can be immersed in a cold disinfectant solution (such as a solution with a sodium hypochlorite concentration no greater than 2%), following the manufacturer's instructions. All the components of the nasal douche can be disinfected by boiling them in water for a maximum of 10 minutes: the components must not be in direct contact with the bottom of the pan. The boiling cycle could alter the color or appearance of the components; this may affect the safety of the product. does not affect the functioning of the device.
• Sterilization: all components of the Rinowash nasal douche are compatible with the autoclave sterilization cycle at 121°C for at least 15 minutes (maximum 30 minutes) for a maximum of 20 cycles.

Composition

• Atomizer: polycarbonate.
• External bell: polycarbonate and silicone.
• Seal: silicone.

All materials used do not contain phthalates and the presence of natural latex has not been detected.

Warnings

This spare parts kit can only be used with the Rinowash device. Refer to the Rinowash device instructions for use.

Storage

Store the product at a temperature between -25°C and +50°C and at a humidity between 30% and 90%.