Strep a - 2 tests for the diagnosis of streptococcus a

Product Description

Medical device for the diagnosis of Group A Streptococcus

Indications

Screen Test Streptococcus A is a rapid test for self-diagnostic use for the qualitative detection of Group A Streptococcus antigen from throat swab specimens to aid in the early diagnosis of Group A Streptococcus infection.

Directions for use and Dosage

1. Bring the product and extraction reagents to room temperature (10 ° C ~ 30 ° C) before performing the test;
2. Add 4 drops of Extraction Reagent A and 4 drops of Reagent B to the respective extraction tube and mix thoroughly;
3. Place the sample extraction swab in the tube. Shake the swab ten times. Leave the swab in the tube for one minute. Then remove the swab, squeezing the swab head against the inside of the tube as you remove it to remove as much liquid from the swab as possible. Discard the swab.
4. Cap the tube and mix the contents by swirling gently. The sample must be tested very quickly.
5. Remove the test from the sealed foil pouch by tearing at the notch and place the test on a clean, dry, flat surface. Add 3 drops of mixed liquid sample from the tube to the sample well (depicted with an arrow) of the test cassette by inverting and squeezing the tube as shown.
6. Wait 10 minutes and read the results. Do not read the results after 15 minutes.

Warnings

Do not exceed the recommended daily dose. Keep out of reach of children under 3 years of age. Food supplements should not be used as a substitute for a varied diet and a healthy lifestyle.

Format

2 tests