Bericah Sensinitryl Pro is a non-sterile, powder-free, disposable nitrile glove ideal for protection against chemicals and microorganisms.
Indications
Bericah Sensinitryl Pro are non-sterile, powder-free, disposable nitrile gloves. Latex- and phthalate-free, they protect against possible allergic reactions related to natural rubber latex proteins. Blue in color, ambidextrous, and micro-rough.
Bericah Sensinitryl Pro are non-sterile, powder-free, disposable nitrile medical examination gloves. Class I pursuant to rule 5 of Annex VIII of MDR 2017/745, as an invasive device for temporary use in relation to body orifices.
Five-finger protective glove against chemicals and microorganisms, to be used for activities falling within risk category III.
Disposable, multipurpose, non-sterile examination glove, made of 100% pure, latest-generation nitrile NBR. Ambidextrous with a tear-resistant and anti-roll cuff that ensures adequate grip even over a gown. Powder-free, single-piece, free of burrs and welds. Micro-rough surface on the fingertips that ensures maximum sensitivity and optimized grip. Free of natural rubber latex, it eliminates the risk of type I and type IV allergic reactions related to the presence of water-soluble proteins and chemical residues. Treated with a special online process without the use of toxic chemical agents, which prevents the deposit of surface micro-dust. Free of Phthalates. Accelerators, adhesives, and other potentially allergenic processing residues are absent or undetectable in the laboratory. Highly resistant to the most common disinfectants used in healthcare and to chemicals in general. Highly ergonomic, allowing for prolonged use without fatigue. Made in a matte blue color with an anti-visual fatigue tone. The exceptional elasticity and sensitivity make the device suitable for use in healthcare settings, even for activities with greater biological risk. Its special formulation prevents surface microdust from being retained.
Directions for use
The glove must be put on before starting work. Glove selection must be based on knowledge of the work activity and the work process performed by the operator, taking into account working conditions and associated risks.
Disposable glove for use in chemically and mechanically non-aggressive activities. Always perform a preliminary test under actual conditions of use. Do not use the gloves in contact with the tested chemical for periods exceeding the performance level (0-10 min.; 2-30 min.; 3-60 min.; 4-120 min.; 5-240 min.; 6-480 min.). Wear gloves with dry, clean hands.
Warnings
This product does not require a safety data sheet.
Storage
Keep the packaging for further information and to ensure traceability; avoid direct exposure to sunlight, ozone, and heat sources.
Size
Pack of 100 pieces, size S.
Product Code:FRCM234709
Richiedi info sul prodotto
