Screen check test - non-contact infrared thermometer

Product Description

The Screen Infrared Thermometer is an in vitro diagnostic medical device that measures the temperature of the body or objects using infrared energy.

Indications

In vitro diagnostic medical device CE 0482. The non-contact infrared thermometer measures the temperature of the human body or objects based on the infrared energy emitted from the forehead or from an object (e.g., milk or water). Quick measurement results can be obtained after pointing the temperature meter at the object. The infrared temperature sensor collects infrared energy emitted from the forehead. After being captured by a lens, the energy is converted into temperature by thermopiles and the measuring circuit. Read the warnings and instructions for use carefully.

How to use

• Select the temperature mode: forehead or object.
• Hold the measuring probe a few centimeters from the person or object.
• Press the measurement button.
• After a beep, the measured temperature will appear on the display.
• Holding down the measurement button will take continuous readings, with the highest temperature being the lowest. recorded.

Interactions

During measurement, do not use cell phones or other devices that may cause electromagnetic interference.

Warnings

• Do not use the thermometer for continuous temperature monitoring.
• Do not place the thermometer in water or other liquid; it is not water-repellent.
• Clean and disinfect the thermometer as described in the manual.
• Do not touch the tip of the temperature gauge, which has a precision temperature sensor.
• The ambient temperature should not be too high or low. To ensure an accurate reading, keep the thermometer at room temperature for more than 30 minutes before use.Do not use the thermometer at room temperatures above 40°C (104°F) or below 10°C (50°F), which are beyond the thermometer's operating temperature range.The thermometer is not intended for the diagnosis or treatment of any disease or illness. Measurement results are for reference only.It is dangerous to perform self-diagnosis or treatment based on the measurement results. Consult a doctor or other healthcare professional for further information.
• Do not recharge an dry cell alkaline battery or dispose of it in a fire. Otherwise, the battery may explode.
• Do not disassemble the thermometer in an attempt to repair it. Otherwise, the thermometer may be permanently damaged.Do not use mobile phones or other devices that may cause electromagnetic interference during measurement.Do not use the thermometer in an environment containing flammable air-based, oxygen-based, or nitrous oxide-based cosmetics.

Storage

The thermometer should be packaged and stored in a well-ventilated room free of corrosive gases. The ambient temperature must be between -10°C and +50°C (14°F-122°F), the relative humidity must be less than 93% (non-condensing), and the atmospheric pressure 50–106 kPa. The thermometer's lifespan is 5 years.

Size

Box containing 1 piece.