Inmd-013 - transparent protective face shield

Product Description

Safety visor for face and eye protection.

Features

The Inmd-013 protective visor was designed as a safety shield to protect the face and eyes.
It is unisex and is made with a transparent edge to offer a wide viewing angle.
It has an anti-fog coating on both sides to keep visibility always sharp and clear.
Made of PET material with a wrap-around design, it ensures excellent coverage.
It is easy to wear and stays in place thanks to the elastic band on the back and the soft and delicate 3 cm latex sponge on the forehead.
It is suitable for civil protection from minor risks.
Within the limits established by law, the product can be used in the following ways: It can be used in activities such as laboratory work, woodworking, mowing, gardening, drilling, sanding, outdoor sports, by sales staff in shops and supermarkets, kitchens (catering/nursing homes), warehouses.

Protection category: According to Regulation 2016/425 on Personal Protective Equipment, the INMD-013 protective visor is classified as category I PPE, for protection against minor risks.
This visor complies with the requirements set out in Regulation (EU) 2016/425 on PPE and meets the requirements of the harmonised technical standards EN 166:2001 and EN 168:2001.

Instructions for use

1. Before use, remove the transparent plastic film and check that there are no signs of damage on the surface.
2. Stretch the elastic with both hands. hands.
3. Spread the elastic with both hands, put on the visor, placing the sponge on the forehead.
4. Adjust the position of the visor to ensure the best visibility.

Warnings

Read the instructions for use before use.
Before use, check that the packaging is intact.
Before use, remove the transparent plastic film and carefully examine the transparent surface for any signs of damage.
If the protective visor is not intact, please contact the manufacturer for a replacement product.
Carefully follow the instructions on how to wear the visor and pay particular attention to the warnings before use.
Do not use this visor when the concentrations of contaminants are immediately dangerous to your health.
Leave the contaminated area immediately if you experience difficulty breathing, dizziness or other ailments.
Remove, dispose of and replace the protective visor if it is damaged.
Do not alter, modify or use this protective visor for purposes other than those legally permitted for this product category.
For greater protection, we recommend wearing a filter mask over your nose and mouth.

Storage

Store the unused hygienic protective visor in its intact packaging, in a dry place away from direct heat sources at a temperature between -20°C and 30°C;
Humidity must be <80%.

Format

Pack of one visor.