Hylo vision safe drop plus 10 ml - moisturizing eye drops 10 ml

Product Description

Eye drops to relieve dry eyes and promote cell regeneration.

Indications

Hylo vision Safe Drop Plus is a moisturizing eye drop to hydrate and protect the surface of the eye, with hyaluronic acid and allantoin.
For long-lasting relief from dryness, inflammation, and mild irritation.
Thanks to its composition, it promotes cell regeneration. Sterile, phosphate-free, preservative-free solution.
Pleasant, well-tolerated, and long-lasting.
Suitable for both hard and soft contact lenses.
Can be used for the following indications:

• Dry eyes caused, for example, by Sjögren's syndrome or medication.
• In the presence of environmental stress, for example from air conditioning, wind, cold, dry air, or air pollution, e.g. from cigarette smoke.
• In case of fatigue and visual stress caused by prolonged vision, for example long periods of work at the computer, microscope or during long car journeys.
• Under mechanical stress, for example wearing rigid or soft contact lenses or due to diagnostic procedures on the eye.

The product is a CE Medical Device.

Ingredients

Highly Purified Sodium Hyaluronate (0.20%), Allantoin, Sodium Chloride, Citrate Buffer, Purified Water.

Directions for use and Dosage

For external use only.

1. Before first use, write down the opening date in the space provided on the bottle label.
   Wash your hands and remove the protective cap before each use.
2. Before Before using the SafeDrop bottle for the first time, press it several times until the first drop is released.
   Hold the bottle upside down, as shown in the illustration.
   Avoid any contact of the dropper tip with your fingers and your eye.
3. Hold the bottle as shown in the illustration.
   Make sure your thumb rests on the large, circular, non-slip finger rest.
4. Now tilt your head back slightly and gently pull your lower eyelid away from your eye with your free hand. Instill one or two drops of Hylo-Vision SafeDrop Plus into the conjunctival sac of each eye, actuating the pump mechanism once or twice.
   Make sure the bottle is held vertically.
   Slowly close your eyes so that Hylo-Vision SafeDrop Plus can spread evenly over the surface of the eye.
   Alternatively, if you are using the eye drops with contact lenses, apply one or two drops to each of your contact lenses before inserting them into your eyes, instead of putting the drops directly into your eyes.
   Hylo-Vision SafeDrop Plus can also be used while wearing contact lenses.
   After use, the multi-dose container must be closed with the protective cap.

Warnings

Do not use if the SafeDrop multi-dose container is damaged.
Do not touch the eye with the tip of the dropper, to avoid infection or injury. eye.
Do not touch the dropper tip with other objects or parts of the body.
Do not use as the sole treatment for an eye infection.
Do not use the eye drops after the expiry date, which is indicated on each SafeDrop vial on the folding carton.
A single multi-dose container should not be used by more than one patient.
Hylo-Vision SafeDrop Plus is not suitable as a contact lens storage solution.
Hylo-Vision SafeDrop Plus should be kept out of the reach of children.
If symptoms persist while using Hylo-Vision SafeDrop, consult your eye doctor.
Do not use if you are hypersensitive (allergy) to any of the ingredients.
Suitable for use in adolescents and adults.
Pregnant or breastfeeding women and young children should consult their doctor before using Hylo-Vision SafeDrop Plus.
Side effects:

• After application, temporary impairment of visual acuity (blurred vision) may occur.
  In this case, do not drive or operate machinery.
  It is advisable to wait until normal visual acuity returns.
• After applying the eye drops, transient symptoms, such as mild burning in the eyes, may appear immediately.

Storage

Store at temperatures between +5°C and +25°C.
Protect from frost and direct sunlight.

Format

10 ml multidose vial