Glucomen areo 2k - blood glucose and ketonemia meter

Product Description

CE Medical Device.

Indications

Glucomen Areo 2K Meter Set is the system for self-monitoring of blood glucose and ketonemia. Indicated for the quantitative determination of glucose and beta-hydroxybutyrate (beta-ketone) concentrations in fresh capillary whole blood. Designed for self-monitoring of diabetes mellitus, for monitoring and controlling blood glucose and ketonemia, it can also be used in hospital settings by healthcare professionals. It is not intended for the diagnosis or screening of diabetes and ketonemia, nor for use on newborns. Do not change your treatment based on the results of tests performed with the meter without first consulting your doctor or healthcare professional.

How to use

Blood glucose testing procedure

1. Insert a new GlucoMen areo Sensor (white) into the test strip port. The drop symbol will start to flash on the display and the glucose symbol "Glu" will appear in the lower left corner. If nothing appears on the display, remove the sensor, reinsert it into the port and wait for the drop symbol to start flashing.
   For information on how to use the lancing device, read the instructions for use.
2. Keep the tip of the sensor in contact with the drop of blood until the control window fills. You will then hear a beep (if enabled) and the display will show a countdown.
3. Read the test results. A beep will announce the appearance of the test result on the screen with the glucose symbol "Glu".
4. To remove the sensor, press the eject button. The meter will turn off.

Blood Ketone Test Procedure

1. Insert a new GlucoMen areo Beta-Ketone Sensor (light purple) into the test strip port. The drop symbol will start flashing on the display and the ketone symbol "Keth" will appear in the lower left corner. If nothing appears on the display, remove the sensor, reinsert it into the port and wait for the drop symbol to start flashing.
2. Keep the tip of the sensor in contact with the drop of blood until the control window fills. You will hear a beep (if enabled) and the display will show a countdown.
3. Read your test results. A beep will announce that the test result appears on the screen with the ketone symbol " Keth." The symbol will flash until the meter turns off.
4. To remove the sensor, press the eject button. The meter will turn off.
   Do not use the GlucoMen areo Beta-Ketone Sensor test strips for testing alternative site samples: use only fresh capillary blood from your fingertips.

Warnings

Keep the meter, sensors, and other components out of the reach and sight of children. Small parts may pose a choking hazard.
Handle the vial and sensors with clean, dry hands.
Dispose of the used vial and sensors according to local regulations.
Handling blood may cause serious injury. be dangerous: use extreme caution when handling blood, sensors, lancets and the instrument.

Storage

Instrument storage conditions:

• temperature: -20-50°C;
• relative humidity: 20-90%.

Do not store or use the instrument in environments where:

• the temperature may fluctuate rapidly;
• the humidity is high and causes condensation (bathroom, laundry room, kitchen, etc.);
• there is a strong electromagnetic field (near a microwave oven, a mobile phone, etc.).