Check - 2 test for vaginal ph

Product Description

CE Medical Device.

Indications

Screen Check Vaginal pH is the rapid test for the semi-quantitative determination of pH in female vaginal swab samples. For in vitro self-diagnostic use only.

Directions for use and Dosage

Sample collection and preparation

The rapid vaginal pH test (vaginal swab) can be used for be performed using a female vaginal swab specimen.

1. Wash your hands before starting the test.
2. Open the package, remove the swab from the package, and do not touch the end of the swab (polyester tip).
3. Part the labia to expose the vagina.
4. Insert the tip of the swab gently into the vagina and press gently until about 5 cm of the swab is inside the vagina, for about 10 seconds. This 10-second period is important to ensure that the tip of the swab is well soaked in vaginal secretions. Sufficient inhibition is very important for evaluating the test.
5. Remove the swab from the vagina for testing.

Bring the test, reagents, specimen, and/or controls to room temperature (15-30°C) before performing the test.

1. Remove the test from the sealed pouch and use it within one hour. Best results are obtained if the test is performed immediately after opening the pouch.
2. Place the test on a clean, flat surface.
3. Place the swab tip soaked in vaginal secretion on the pH area of ​​the test at least 5 times, ensuring that enough secretion is applied to the pH area of ​​the test.
4. Read the results immediately while the measuring area is still wet. Compare the color of the pH area with the reference on the package and note the corresponding color scale value closest to the test. After evaluation, discard the test and swab.

Storage

Store in the sealed pouch at room temperature (2-30°C). The test is stable until the expiration date printed on the pouch. The test must remain in the sealed pouch until use. Do not use beyond the expiration date.

Format

2 Tests.