Powder-free disposable nitrile glove for examinations, food processing, and professional use.
Indications
The Ajsia G00113 Linear disposable examination glove is made of a powder-free, chlorinated nitrile blend.
Recommended areas of use include healthcare, dentistry, and the cosmetics industry. Suitable for contact with food and compliant for use in the processing and production of grain-based foods and starch products, in the meat and meat product slaughtering industry, in the fruit and vegetable processing and production industry, and in the Horeca sector.
- Micro-roughened fingers
- Blue-purple color
- Rolled cuff
- Ambidextrous
- Super sensitive
- Powder-free
Mode Instructions for Use and Dosage
Wear gloves on clean, dry hands, free of rings, bracelets, watches, piercings, etc., so that the glove fits snugly around the fingertips and palm without risk of superficial lacerations. To determine the correct glove size, consider that it should not be too tight or too loose.
Procedure for Removing Contaminated Gloves
- To begin removal, grasp the palm of your non-dominant hand and pull the glove out.
- Slide your hand out and hold the empty glove in the hand that still has the glove. Do not touch the glove with your bare hands.
- Now slide the index finger of your bare hand to the underside of your other wrist, inside the contaminated glove, being careful not to touch the outside, and pull the glove over the glove in your hand.
- Dispose of in the appropriate container.
- Wash your hands thoroughly, possibly with disinfectant soap.
Warnings
This information does not reflect the actual duration of protection in the workplace or the differentiation between mixtures and pure chemicals.
Chemical resistance was evaluated under laboratory conditions on samples taken from the palm only and refers to the chemicals tested. It may differ if the chemical is used in a mixture. It is recommended to verify that the gloves are suitable for the intended use because Workplace conditions may differ from the test depending on temperature, abrasion, and degradation.
If used, protective gloves may provide reduced resistance to hazardous chemicals due to changes in physical properties and significantly reduce effective use time. For corrosive chemicals, degradation may be the most important factor to consider when choosing chemical-resistant gloves.
Before use, check that the glove is in good condition: no cuts, holes, cracks, etc. If these conditions are not met, replace the PPE/DM immediately. The glove must be used only for the risks covered by this information note and alterations to the certified configuration are not permitted. When used as a non-sterile medical device, it must be used temporarily if used invasively, in relation to the body's natural orifices.
The information leaflet must be kept for the entire life of the PPE/MD in use.
Once opened, the packaging must be protected from direct exposure to sunlight and fluorescent light.
The gloves are packaged in cardboard boxes.
The gloves must be stored in their original packaging, in a clean, dry place, away from excessive heat sources (> 30°C) and direct sunlight. The user is advised to check the integrity of the glove before use. The glove must be used in its intact packaging and in the storage conditions indicated on the packaging, no later than the expiration date indicated on the packaging.
Gloves must be replaced after use as they are disposable and therefore cannot be subjected to maintenance, washing, or reuse.
Contraindications
The glove must not be used in contact with open wounds or in surgical fields or inside unnatural body orifices or where sterility of the device is required.
Storage
Store away from light, in a cool, dry place.
Shelf life Unopened: 60 months.
Format
Pack of 100 pieces.
Product Code:FRCM237111
Richiedi info sul prodotto
