Oxy-2 - finger oximeter

Product Description

Instrument for measuring oxygen saturation and heart rate from the finger.

Indications

The Oxy-2 pulse oximeter is a non-invasive device designed for the instantaneous monitoring of arterial hemoglobin saturation (SpO2) and heart rate of adults and children in home and hospital environments (including clinical use in internal/surgical therapy, anesthesia and intensive care, etc.).

The product is a CE Medical Device.

Features

Pulse oxygen saturation is the percentage of HbO2 in the total Hb of the blood, and is called O2 concentration in the blood.
It is an important biological parameter for respiration.
In order to measure SpO2 more accurately, a blood oxygen saturation (SpO2) must be measured. easily and accurately, Gima has developed the Pulse Oximeter.
The product can also simultaneously measure the heart rate.
The Finger Pulse Oximeter is compact, practical to use and transport and has low energy consumption.
The patient simply inserts the tip of the finger into the photoelectric sensor of the device and the Hemoglobin Saturation value immediately appears on the screen.
It can be used both before and after physical activity, while it is not recommended during.

• SpO2 shown on the screen.
• Pulse rate display, bar graph.
• Low voltage indicator.
• Auto power off: The unit automatically turns off within 5 seconds if the finger is not placed in the probe.

Technical Information

Display type: LED.
SpO2 measuring range: 0 - 100%, (resolution 1%).
Accuracy: 70 - 100%: ± 2%, below 70% not specified.
PR measuring range: 30 - 250 bpm, (resolution 1 bpm).
Accuracy: ± 2 bpm or ± 2% (select whichever is greater).
Measurement performance under weak filling conditions: SpO2 and heart rate are displayed correctly when the pulse-to-filling ratio is 0.4%.
The SpO2 error is ± 4%, the heart rate error is ±2 bpm or ±2% (select whichever is greater).
Power consumption: less than 25 mA.
Voltage: DC 2.6 V - 3.6 V.
Battery operation: two batteries can work continuously for 24 hours.
Safety: internal battery, type BF.
Dimensions: 60x30.5xh 32.5 mm.
Weight: 50 g including the two batteries.

How to use and Dosage

1. Insert the two batteries in the correct direction and then replace the cover.
2. Open the sensor.
3. Have the patient insert the finger into the rubber-coated sensor (make sure the finger is in the correct position), then let the sensor close on the finger.
4. Press the power button on the front panel.
5. Do not move the finger and keep the patient at rest during the measurement. Furthermore, the patient is advised not to move.
6. The measurement results are displayed directly on the display.
7. In the startup state of the recorder, press the button and the device is reset.

Warnings

Explosion Hazard - DO NOT use the Pulse Oximeter in environments containing flammable gases such as some flammable anesthetic agents.
DO NOT use the Pulse Oximeter while the patient is undergoing MRI or CT scan.
A person allergic to rubber should not use the Pulse Oximeter. use this device.
Disposal of waste parts, accessories, and packaging (including the battery, plastic bags, polystyrene, and cardboard boxes) must comply with local laws and regulations.
Please check the packaging before use to ensure that the device and its accessories
fully comply with the packing list, otherwise the device may malfunction.
Please do not measure this device with paper function tests for the relevant device information.
This device is not intended for continuous monitoring.

Format

The package includes:

• 1 Pulse Oximeter.
• 2 Batteries.
• 1 Lanyard.
• Manual.